Fostex X-12 Owner's Manual page 14

Model X-12 Owner's Manual
The following table indicates the switch and knob settings used for overdubbing to
Tracks 3 and 4. Refer to this table and to the steps described on the previous page
to overdub the keyboard to Track 3 and vocal to Track 4.
Sound source
Plug the keyboard
Overdubbing the
o u t p u t t o t h e
keyboard to
[INPUT] jack.
Track 3
Plug the mic into the
Overdubbing the
[INPUT] jack.
Vocal to Track 4
When you are monitoring the recording sound and playback sound simultaneously,
refer to the table below for the relationship between the position of the [PAN] knob
and the sound balance.
Adjust the balance according to your needs. The recording sound will be always
positioned in the center.
[LINE-MIC] knob
Adjust to optimum
level by CCW rotation
(LINE) of the knob.
Adjust to optimum
level by rotating the
knob CW (MIC).
<Using the Playback [PAN] knob>
[PAN] position
Center
PAN
Both playback sound and recording sound will be
centered.
L R
Hard "R"
PAN
The playback sound will be positioned on the right
and the recording sound will be centered.
L R
Hard "L"
PAN
The playback sound will be positioned on the left
and the recording sound will be centered.
L R
[REC TRACK]
Playback level fader
selector
Adjust playback levels of
Select track 3
tracks 1 and 2 with playback
for recording.
faders 1 and 2.
Adjust playback levels in
Select track 4
tracks 1 - 3 with playback
for recording.
level faders 1, 2 and 3.
Monitoring sound position
14
Playback [PAN] knob
Adjust the playback sound
for comfortable monitoring
(Refer to <Using the
Playback [PAN] knob>
below).
Adjust the playback sound
for comfortable monitoring
(Refer to <Using the
Playback [PAN] knob>
below).