Using The Audio Cover; Hands-Free Microphone And Light Sensor - Subaru AUDIO VIDEO & NAVIGATION SYSTEM Owner's Manual

Operation
■
Attaching the PND
(1) Latch the left-hand side of PND to the
receiver.
Engage the catch at the left end of the PND with
the lock on the main unit.
(2) Attach the PND to the receiver.
Press the right-hand side of PND until it clicks in
position.

Using the Audio Cover

■
Using the Audio Cover
After detaching the PND, we recommend you to
use the audio cover for this receiver.
■
Fitting the Audio Cover
(1) Mount the left end of audio cover on
this receiver.
Engage the catch at the left end of the audio
cover with the lock on the main unit.
(2) Mount the entire audio cover on this
receiver.
Press the right-hand side of audio cover so that it
fits and clicks.
- 16 -
■
How to Detach the Audio Cover from the
Main Unit
(1) Press the [Release] button.
This removes the right edge of the audio cover
from the main unit.
(2) Remove the audio cover.
Hold the audio cover on the right side, lift it up
and pull it toward you to remove it.
Hands-Free Microphone and Light
Sensor
The PND is equipped with a built-in hands-free
microphone and a light sensor. For details on
how to use the hands-free call function or
configure light sensor settings, refer to the
operation manual of the PND.
IMPORTANT
Pressing a sharp object against the hands-free
microphone or the light sensor may damage them.
Light sensor
Built-in hands-free microphone