Download
Share
Print this page
Viking PB-100 Technical Practice
  1. Manuals
  2. Brands
  3. Viking Manuals
  4. Recording Equipment
  5. PB-100
  6. Technical practice

Viking PB-100 Technical Practice

Polling bridge and phone line interface
Hide thumbs Also See for PB-100:
1
2
3
4

Advertisement

Quick Links

Download this manual See also: Technical Practice
TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
When used to poll 1600A Series Emergency Phones, the application software allows the user
to set up a list of phones to call along with a scheduled time for calling. Through the PB-100,
each phone can be called, its ID code verified and it's mic and speaker tested. When finished,
the application software logs the time of the call and the results.
When programming an AES-2000, the application software allows the user to manage multiple
units with resident's phone numbers and access codes. By using a standard telephone con-
nected to the PB-100, the recording of each tenant's name can be done. The software also sup-
ports delayed uploading the downloaded statistics.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
• Compatible with Windows XP, Vista and Win7
• USB to RS-232 cable provided
• Male sub-D 9 pin cable provided
• Audio out jack for monitoring
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
Multi-Purposed PC to Phone Line Bridge
with Application Software
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
The PB-100 is used to provide status polling
of Viking 1600A Series Emergency Phones
or remote programming of AES-2000 Entry
Systems. The PB-100 can connect to an
unused serial port on your PC or use the
included RS-232 to USB converter cable to
connected to a USB port. A CD is provided
with these two applications along with soft-
ware for programming other Viking products.
A
p
p
l
i
A
p
p
l
Software Provided For:
• 1600A Series Emergency Phone Polling
• Remote programming of AES-2000
Accessible Entry System (DOD# 202)
• PC programming of K-2000-DVA Multi
Input Voice Dialer (DOD# 303)
S
p
e
c
S
p
e
c
Power: 120V AC/12V DC 500mA, UL listed adapter provided
Dimensions: 127mm x 127mm x 25mm (5" x 5" x 1.5")
Weight: 1.36 kg (3 lbs.)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-
condensing humidity
P.C. Interface: 9-pin RS-232 (cable included)
Software/Hardware Requirements:
• IBM Compatible personal computer with an available serial port
CD drive, and Windows compatible sound card
• Windows: 95 or 98 (with OLE32 updates), NT 4.0 (service
pack 6 or higher ), 2000 (service pack 2 or higher), or XP
• 5MB of hard drive space
• 8MB of free physical RAM
PB-100
PB-100
Polling Bridge and
Phone Line Interface
October 4,, 2012
E
N
T
U
R
Y
E
N
T
U
R
Y
c
a
t
i
o
n
s
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s

Advertisement

loading

Related Manuals for Viking PB-100

Summary of Contents for Viking PB-100

  • Page 1 When used to poll 1600A Series Emergency Phones, the application software allows the user to set up a list of phones to call along with a scheduled time for calling. Through the PB-100, each phone can be called, its ID code verified and it’s mic and speaker tested. When finished, the application software logs the time of the call and the results.
  • Page 2 PC. If a serial port is not available, use the included RS-232 to USB cable to connect to a USB port. Step 3. If audio is to be used through the PB-100, connect the “Audio In” or “Mic In” of the sound card to the “AUDIO OUT” port of the PB-100.
  • Page 3 This utility is useful for troubleshooting the connection between the PB-100 and your PC. If an “H” followed by Enter is received by the PB-100, it will send back a “K” and a carriage return. Do this to assure you have the correct com port configured for the PB-100.
  • Page 4 Dip Switch 4 to the ON position to attenuate the unwanted noise. Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information.