Ford 2010 Fusion Owner's Manual page 215

Ford 2010 fusion automobile owner's manual
Hide thumbs Also See for 2010 Fusion:
Table of Contents

Advertisement

P (Park)
This position locks the transmission
and prevents the front wheels from
turning.
To put your vehicle in gear:
• Press the brake pedal
• Move the gearshift lever into the
desired gear
To put your vehicle in P (Park):
• Come to a complete stop
• Move the gearshift lever and
securely latch it in P (Park)
WARNING: Always set the parking brake fully and make sure
the gearshift is latched in P (Park). Turn the ignition to the off
position and remove the key whenever you leave your vehicle.
R (Reverse)
With the gearshift lever in R (Reverse), the vehicle will move backward.
Always come to a complete stop before shifting into and out of R
(Reverse).
N (Neutral)
With the gearshift lever in N (Neutral), the vehicle can be started and is
free to roll. Hold the brake pedal down while in this position.
D (Drive)
The normal driving position for the best fuel economy. Transmission
operates in gears one through six.
L (Low)
This position:
• Provides increased engine braking during downhill/mountain driving.
• Provides extended shift scheduling, allowing both upshifts and
downshifts, at a higher overall RPM to provide optimum engine
braking.
• Is not intended for use under extended or normal driving conditions
and results in lower fuel economy.
2010 Fusion (fsn)
Owners Guide, 2nd Printing
USA (fus)
Driving
215

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fusion

Table of Contents