Page 3
G. Making telecommunication data transmission of the software. Apricorn has the right to terminate this license if there is a violation of its terms or default by the Original Purchaser. Upon termination for any reason, all copies of the Software must be immediately returned to Apricorn, and the Original Purchaser shall be liable to Apricorn for any and all damages suffered as a result of the violation or default.
Page 4
MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE OR THAT ANY DEFECTS WILL BE CORRECTED. NO LIABILITY FOR CONSEQUENTIAL DAMAGES - IN NO EVENT SHALL APRICORN OR ITS VENDORS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR...
1.3.3 Supported file systems ....................9 1.3.4 Supported storage media .................... 9 1.4 Technical support......................9 Chapter 2. Apricorn EZ Gig II installation and startup .........10 2.1 Installing Apricorn EZ Gig II ..................... 10 2.2 Extracting Apricorn EZ Gig II.................... 10 2.3 Running Apricorn EZ Gig II ....................
PCMCIA) removable media drives, as well as CD-R/RW, DVD-R/RW, DVD+R/RW, magneto-optical, Iomega Zip and Jaz drives. If you are going to install a new hard disk drive, Apricorn EZ Gig II will help you transfer information from the old one in minutes, including operating systems, applications, documents and personal settings.
Linux®. 1.3.3 Supported file systems • FAT16/32 • NTFS If a file system is not supported or is corrupted, Apricorn EZ Gig II can copy data using a sector-by-sector approach. 1.3.4 Supported storage media • Hard disk drives • Networked storage devices •...
2.2 Extracting Apricorn EZ Gig II When installing Apricorn EZ Gig II, you can save the setup (.msi) file on a local or network drive. This will help when modifying or recovering the existing component installation.
If your disk data is totally corrupted and you cannot boot, load the standalone Apricorn EZ Gig II version from the bootable media, supplied with the retail box or created by you using EZ Gig II Media Builder. Then you will be able to restore the disk from its previously created image.
Chapter 3. General information 3.1 What is disk/partition image? Backing up disks and partitions is performed in a following way: Apricorn EZ Gig II stores a sector-by-sector snapshot of the disk, which includes the operating system, registry, drivers, software applications and data files, as well as system areas hidden from the user. This procedure is called “creating a disk image,”...
Chapter 4. Using Apricorn EZ Gig II 4.1 Main program window The main program window contains the menu, the toolbar, the sidebar and the main area. The main area contains operation icons, while the sidebar features the Category, Tools and Help panels.
Options – open a window for editing default backup/restore options, setting text appearance (fonts) etc The Help menu is used to invoke help and obtain information about Apricorn EZ Gig II. Status bar At the bottom of the main window, there is a status bar divided into two parts. The left side briefly describes the selected operation;...
FTP server requires the archive to be split into files of no more than 2GB). The preset is Automatic. With this setting, Apricorn EZ Gig II will act as follows. When backing up to the hard disk: If the selected disk has enough space and its file system allows the estimated file size, the program will create a single archive file.
No options or selections such as resizing partitions will be possible. Under Advanced tab you can select full, safe or both Apricorn EZ Gig II loader versions. The safe version does not have USB, PC card or SCSI drivers and is useful only in case the full version does not load.
The boot CD from which you loaded the program does not keep you from using other CDs with backups. Apricorn EZ Gig II is loaded entirely into RAM, so you can remove the bootable CD to insert the archive disk.
6.3 Restoring disks/partitions or files from images To restore a partition (disk) from an image, Apricorn EZ Gig II must obtain exclusive access to the target partition (disk). This means no other applications can access it at that time.
Though seldom required, you can change the partition file system during its restoration. Apricorn EZ Gig II can make the following file system conversions: FAT 16 -> FAT 32, Ext2 -> Ext3. For partitions with other native file systems this option is not available.
6.3.9 Assigning a letter to the restored partition Apricorn EZ Gig II will assign an unused letter to a restored partition. You can select the desired letter from a drop-down list. If you set the switch to No, no letters will be assigned to the restored partition, hiding it from OS.
1. You can choose whether to restore file date and time from the archive or assign the files the current date and time. 2. Before data is restored from the archive, Apricorn EZ Gig II can check its integrity. If you suspect that the archive might have been corrupted, select Validate backup archive before restoration.
CD contains, besides the program installation files, the Apricorn EZ Gig II standalone bootable version. If you purchased Apricorn EZ Gig II on the Web, you can create such media using the EZ Gig II Media Builder. For this, you will need a CD-R/RW blank, DVD+R/RW blank, several formatted diskettes (the wizard will tell you the exact number), or any other media your computer can boot from, such as a Zip drive.
Page 38
When using 3.5” diskettes, you will be able to write on a diskette (or a set of the diskettes) only one component at a time (for example, Apricorn EZ Gig II). To write another component, start EZ Gig II Media Builder once again.
Cancel. 8.2 Viewing logs Apricorn EZ Gig II allows you to view its working logs. To invoke the log window, select Show log on the toolbar or from the Tools menu. The log browsing window contains two panes: the left one features the log list, while the right one shows selected log contents.
Yes (in R/W mode) Files extraction The current version of Apricorn EZ Gig II can mount or explore an image archive only if all its volumes reside in the same directory. If your archive spans several CD-R/RW discs and you wish to mount the image, you should copy all volumes to a hard disk drive or network drive.
Page 43
If you added a comment to the archive, it will be displayed to the right of the drives tree. If the archive was protected with a password, Apricorn EZ Gig II will ask for it. Neither the partitions layout, nor the Next button will be enabled until you enter the correct password.
10.3.7 Selecting destination structure Apricorn EZ Gig II will offer you the following data transfer methods: • As is - a new partition will be created for every old one with the same size and type, file system and label •...
As a rule, "as is" transfers not recommended as they leave much unallocated space on the new disk. Using the "as is" method, Apricorn EZ Gig II transfers unsupported and damaged file systems.
Cloning a non-system disk or a disk containing an operating system, but one that is not currently active, will proceed without reboot. After you click Proceed, Apricorn EZ Gig II will start cloning the old disk to the new disk, indicating the progress in a special window. You can stop this procedure by clicking Cancel.
Page 55
After you click Proceed, Apricorn EZ Gig II will start creating new partitions, indicating the progress in a special window. You can stop this procedure by clicking Cancel. You will then have to repartition and format the new disk or repeat the disk add procedure.
Set the boot sequence to A:, C:, CD-ROM or some other, depending on where your copy of Apricorn EZ Gig II is located. If you have a boot diskette, set the diskette to be first; if it is on a CD, make the boot sequence start with CD-ROM.
Method of translation of sector addresses. (Translation LBA/ Method) Large/Auto For example, to demonstrate the main features of Apricorn EZ Gig II, we used a Quantum Fireball TM1700A hard disk as one of the disks in our examples. Its parameters have the following values:...