Automatic Temperature Control (Atc) System Operating Tips; Automatic Operation; Override Operation; In Max A/C Setting - Ford 2006 Fusion Owner's Manual

Automatic Temperature Control (ATC) system operating tips

• To reduce fog build up on the windshield during humid weather, place
the air flow selector in the
• To reduce humidity build up inside the vehicle, do not drive with the
system OFF, or with recirculated air
• Do not put objects under the front seats that will interfere with the
airflow to the back seats.
• Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
• To improve the A/C cool down, drive with the windows slightly open
for 2-3 minutes after start up or until the vehicle has been "aired out."
• For maximum cooling performance (MAX A/C):

Automatic operation:

• Press AUTO for full automatic operation.
• Do not override A/C or
• Set the temperature to 60° F (16° C).

Override operation:

• Select air distribution.
• Select A/C and
with A/C to provide colder airflow.
• Set the temperature to 60° F (16° C).
• Set highest fan speed initially, then adjust to maintain comfort.

In MAX A/C setting:

• Move the temperature control to full cold.
• Set highest fan speed initially, then adjust to maintain comfort.
In (panel) or
• Move temperature control to full cold.
• Select A/C and
to provide colder airflow.
• Set highest fan speed initially, then adjust to maintain comfort.
2006 Fusion (fsn)
Owners Guide (post-2002-fmt)
USA (fus)
position.
engaged and A/C off.
(recirculated air).
(recirculated air). Use
(panel/floor) modes:
(recirculated air). Use recirculated air with A/C
Climate Controls
(recirculated air)
33