Troubleshooting - American DJ Jellydome User Instructions

Jellydome
Show Designer.™ to control the DMX traits. Operating through a DMX
controller gives freedom to create unique programs tailored to one's
individual needs.
1. The Jellydome™ uses 3 DMX channels. Channel 1 controls the
dimmer/strobe, channel 2 controls the colors, and channel 3 con-
trols dome rotation. See bottom of this page for the DMX traits.
2. To control your fixture in DMX mode, follow the set-up proce-
dures on pages 5 - 7 as well as the set-up specifications that are
included with your DMX controller. Using the dipswitches assign a
DMX address to the unit. See page 5 for addressing.
3. For help operating in DMX operation consult the manual included
with your DMX controller.
4. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
Jellydome
Stand by Blackout the unit
1. Synchronous Strobe
2. Two light Strobe
Function
3. Sound Strobe
Strobe (LED OFF)
Mode
Jellydome
American DJ - www.americandj.com - Jellydome Instruction Manual Page 9
®
Operation
UC3 Control
Rotation Speed
1-8
Rotation (LED ON)
DMX Traits
Jellydome
First unplug the power. The fuse holder is located above to the power
cord. Using a flat-head screw driver to unscrew the fuse holder.
Remove the bad fuse and replace with a new one.
Jellydome
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses and mirror should be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates (I.e. smoke, fog residue,
dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Jellydome
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a standard 120v wall
outlet.
2. Be sure the external fuse has not blown. The fuse is located on
the bottom panel of the unit.
3. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
American DJ - www.americandj.com - Jellydome Instruction Manual Page 10
®
Fuse Replacement
Cleaning
Trouble Shooting