American DJ Mega Pixel LED User Instructions page 5

Mega Pixel LED
desired Channel mode.
3. Press ENTER, and then press and hold the MODE button
to confirm.
least three seconds
Sh 1 - Sh 8
- Show modes 1 - 8 (Factory programs).
1. Tap the MENU button until "ShNd" is displayed, press ENTER.
2. "Sh X" will now be displayed, "X" representing a number
between 1-8. Programs 1-8 are factory programs, while "Sh 0" is
random mode. You can also choose "ATFA" which is Auto Fade
mode. Press the UP or DOWN buttons to find your desired show
and press ENTER to confirm.
3. The display will now show "SP X". Press the UP or DOWN but-
tons to set the speed of your desired show. You can only adjust
the speed of shows 1-8, and the speed adjustment rate is 1-8 as
well. Choose the speed and press ENTER to confirm.
SOUN
- In this mode you can run one of the eight show
modes (factory programs) in sound active mode
1. Tap the MENU button until "SOUN" is displayed, press ENTER.
2. Either "ON" or "OFF" will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Follow the directions above for Show modes. Find your desired
program and press the ENTER button to confirm.
bLNd
- This will control blackout
1. Tap the MENU button until "bLNd" is displayed, press ENTER.
2. Either "YES" or "NO" will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button
to confirm.
least three seconds
American DJ Supply - www.americandj.com - Mega Pixel LED Instruction Manual Page 9
© ®
System Menu Mega Pixel LED
for at LEd
1. Tap the MENU button until "LEd" is displayed, press ENTER.
2. Either "ON" or "OFF" will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button
least three seconds
CoLo
Tap the MENU button until "CoLo" is displayed, press ENTER.
Either "CoL X", "X" representing a number between 1-9 or "Manu"
(Manual) will be displayed. Press the UP or DOWN buttons to
select either a static color or manual mode. If you select a static
color press and hold the MENU button for at least three seconds
to confirm.
"Manu" (Manual) - Make your own color by mixing and adjusting
the red, blue and green manually. Select "Manu", press ENTER,
red is first, adjust red between 1-255, press ENTER. Green is
next, now adjust the green, and press ENTER. Blue is last, make
your adjustments. You can continue to adjust red, green, and
blue by pressing the ENTER button.
When you are finished press and hold the MENU button for at least
three seconds to confirm. Your color will now remain static.
VER
1. Tap the MENU button until "VER" is displayed. Press the ENTER
button and the software vesion will be displayed.
2. Press the MENU button to leave this function.
for at
American DJ Supply
©
- This will turn the LED on or off
to confirm.
- This will let you choose a color to remain static.
- This will display the software version
- www.americandj.com - Mega Pixel LED Instruction Manual Page 10
®
System Menu
for at