Warranty Registration; Cleaning Instructions - American DJ Mega Flash DMX User Instructions

Mega Flash DMX™
• Bright 800 Watt Lamp ZB-800
• Adjustable Flash Rate, and Intenstiy Rate
• Flash Rate range of 1 to 15 Flashes per Second
• Thermostat Protection
• Large coverage area
• Easy lamp Replacement
• Built-In Adjustable Hanging Yoke
Mega Flash DMX™
The Mega Flash DMX™ carries a one year (365 days) limited war-
ranty. Please fill out the enclosed warranty card to validate your pur-
chase. All returned service items whether under warranty or not, must
be freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Mega Flash DMX™
Due to fog residue, smoke, and dust cleaning the fixture should be
carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing every 20 days.
2. Use normal glass cleaner with a soft cloth to wipe down the inside
reflector and lens every 30-60 days.
3. Always be sure to dry all parts completely before plugging the
unit back in.
4. Frequent cleaning the unit will extend lamp life and ensure the fix-
tures reliability.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we rec-
ommend cleaning on a monthly basis. Periodic cleaning will ensure
longevity, and crisp beam output.
American DJ www.americandj.com - Mega Flash DMX™ Instruction Manual Page 3
© ® -
Features

Warranty Registration

Cleaning Instructions

Mega Flash DMX™
Safety Issues: This unit may blow a fuse if the maximum allotted load
of 15 amps is reached. If the fuse needs replacement, always replace
the fuse with same exact type that was remove, unless otherwise
instructed by an authorized American DJ
different type fuse from that which is recommended may cause fire or
electric shock and will void the manufactures warranty.
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture.
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short. Do not attempt to oper-
ate this unit if the power cord has been frayed or broken.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6" (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit's main power.
• Always mount this unit in safe and stable matter.
• Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 3 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a
marked change in performance.
American DJ www.americandj.com - Mega Flash DMX™ Instruction Manual Page 4
© ® -
Safety Warnings
service technician. Use of a
®