Selecting Programs And Phrases - American DJ LED Messenger User Instructions

LED Messenge
3. "Pr01" is one of 15 programmed phrases, and "Pr02" - Pr17
are the built-in effect programs. To select your phrase please
see SET UP below.
SET UP -
Selecting your desired phrase -
Note: If the phrase contains four characters or less it will
scroll from right to left, top to bottom, and then bottom to
top. If the phrase contains more then four characters, the
phrase will only scroll from right to left.
1. Press the SELECT PROG button, until "Pr.XX" is displayed.
XX represents the phrase or program number.
2. If you want a phrase to scroll choose "Pr.01. Press the
SELECT PROG button again, rd.XX will be displayed. XX will
represet the current phrase number that is displayed.
3. Scroll to your desired phrase by pressing either the UP or
DOWN buttons. Once your desired phrase is found press the
SELECT PROG button again. NOTE: If you have not pro-
grammed any phrases into memory, the phrases that you
can choose from will only be factory programmed phrases.
4. "S.XXX" will now be displayed. You can now set the speed
of your phrase scroll. The speed is adjustable from "S001"-
"S100". 100 being the fastest speed. Press the SELECT PROG
button again once you have found your desired scroll speed.
5. "Pr.01" will once again be displayed, along with your desired
phrase scrolling at your selected speed and flash rate.
6. Press the FLASH RATE button to activate the flash/stobe fea-
ture. Press the UP and DOWN buttons when the flash feature
is active to adjust the Flash rate. To deactivate the flash feature
press the FLASH RATE button again.
American DJ - www.americandj.com - LED Messenger Instruction Manual Page 11
®
Selecting Programs & Phrases LED Messenge
Selecting your desired program -
1. Press the MODE button, until "Pr.XX" is displayed.
2. Select a desired program "Pr.02"-"Pr.17". Press the SET UP
button.
3. "S.XXX" will now be displayed. You can now set the speed
of your program. The speed is adjustable from "S001"-"S100".
100 being the fastest speed. Press the SET UP button again
once you have found your desired program speed.
4. Your desired program number will once again be displayed,
along with your desired program will play at your selected
speed and flash rate.
5. Press the FLASH RATE button to activate the flash/stobe fea-
ture. Press the UP and DOWN buttons when the flash feature
is active to adjust the Flash rate. To deactivate the flash feature
press the FLASH RATE button again.
American DJ - www.americandj.com - LED Messenger Instruction Manual Page 12
®
Selecting Programs & Phrases