Connecting An Amplifier With An Analog Input; Connecting An Amplifier Or Recorder; With An Optical Digital Input; Before Making Any Connections - Onkyo C-733 Instruction Manual

Connecting the C-733 —Continued

Before Making any Connections

• Always refer to the instructions that came with the
component that you are connecting.
• Do not plug in the power cord until all connec-
tions have been properly made.
• Do not bind audio cables with power cords and
speaker cables. Doing so may adversely affect the
sound quality.
Optical Digital Jacks
The optical digital jacks are fitted with protective
caps. Before connecting a cable, remove the cap and
keep it safely. When you disconnect the cable, put
the cap back in.
Connecting an Amplifier with an
Analog Input
Use the supplied analog audio cable to connect the
C-733's ANALOG OUT L/R jacks to the analog input
jacks on the amplifier, as shown.
To use the system functions, use the supplied
cable to make an connection.
DIGITAL
OPTICAL
OUT
ANALOG
ANALOG
OUT
OUT
L L
L
R R
R
C-733
Supplied cable
L
R
CD
Note
• The C-733 has two jacks. They're both the same,
so you can use either one.
• To use , you must make an analog audio connec-
tion between the C-733 and the other component.
• Use only dedicated cables for
• If you use the C-733 with other components from the
Onkyo Separate Collection, refer to the instruction
manuals supplied with the A-933 as well.
RCA Audio Connection Color Coding
• Red connectors are used for the right channel, and
• Push each plug in all the way to make a good con-
.
Connecting an Amplifier or Recorder

with an Optical Digital Input

If your amplifier or recorder has an optical digital audio
input, you can enjoy digital playback or recording.
Use an optical digital audio cable to connect one of the
C-733's OPTICAL DIGITAL OUT jacks to an optical
digital input jack on the amplifier or recorder, as shown.
REMOTE
REMOTE
CONTROL COMPACT DISC PLAYER
CONTROL
C-733
Supplied cable
connections.
white connectors are used for the left channel.
Left (white)
Right (red)
nection (loose connections can cause noise or mal-
functions).
Right!
Wrong!
DIGITAL
DIGITAL
OPTICAL
OUT
ANALOG
OUT
REMOTE
CONTROL
L L
R R
Both jacks output the
C-733 same signal
Connect one or the other
L
R
OPTICAL
OUT
COMPACT DISC PLAYER
C-733
IN
OPTICAL
9