FoodSaver V300 Quick Start page 2

Getting Started
How to Make a Bag from a FoodSaver Roll
Place Bag on Sealing Strip
Cut enough bag material from roll to hold item
1.
to be vacuum packaged, plus 3 inches. Be sure
to cut straight.
Open appliance lid and place one open end
2.
of cut piece on Sealing Strip
rubber gasket .
(D)
Close lid.
3.
How to Vacuum Package with FoodSaver Bags
Place Bag in Vacuum Channel
Place item(s) in bag, allowing at least 3 inches of
1.
space between bag contents and top of bag.
Open appliance lid and place open end of bag
2.
down into Vacuum Channel
Close lid.
3.
To begin vacuum process, press down firmly on
4.
lid and hold. The motor will turn on as vacuum
process begins.
Registering your appliance is quick and easy at www.foodsaver.com.
Press and Release Lid
, not over
(C)
Press and Release Lid
.
(B)
Press down firmly on lid and hold. The motor
4.
will turn on as the bag is sealing.
When motor turns off, release lid. Press
5.
Open/Cancel Button
Open lid and remove bag.
6.
Now you are ready to vacuum package with your
new bag (see below).
When motor turns off, release lid. The vacuum
5.
process is complete. Press Open/Cancel Button
to open lid.
(A)
Open lid and remove bag. Refrigerate or freeze if
6.
needed. (See FoodSaver Reference Guide for food
safety tips.)
Let appliance cool down for 20 seconds
Note:
each time.
to open lid.
(A)