Page 1
1206 Vandal Resistant Color Pan Tilt Video Door Station - INSTALLATION INSTRUCTIONS - FLUSH MOUNTING INSTRUCTIONS 1. Cut a hole in the wall that is 9-1/16" x 6-1/8". (Ensure that mounting depth of at least 2-11/16" is available.) 2. Pass cable through knockout holes. 3.
Page 2
1. Keep video wires at least 12" away from AC 100~240V power lines. 2. Use 2 conductor non-shielded wire with PE insulation. (Aiphone 871802 wire.) Coax-cable cannot be used. 3. If there are unused wires in the cable, install a 120Ω resistor between each pair of unused conductors.
Min. illumination: Less than 1 Lux (at 20" from camera). Ambient temperature: 14° F ~ 140° F. Wiring: 2 parallel wires, non-polarized to master. PE Insulated, low capacitance. Use Aiphone wire # 871802 Wiring distance: 22AWG 18AWG Distance 165' 330' Dimensions: (HxWxD) 10-3/16"...