Switch The Phone On And Off; Set The Time, Time Zone, And Date; Plug And Play Service - Nokia 6111 User Manual

1. Connect the charger to a wall
socket.
2. Open the cover of the connector
panel (1).
3. Connect the lead from the charger
to the socket on the bottom of your
phone (2).
If the battery is completely discharged,
it may take a few minutes before the
charging indicator appears on the
display or before any calls can be
made.
The charging time depends on the
charger and the battery used.
For example, charging a BL-4B battery
with the AC-4 charger takes
approximately 1 hour and 10 minutes
while the phone is in standby mode.
■ Switch the phone on
and off
Warning: Do not switch the
phone on when wireless
phone use is prohibited or
when it may cause
interference or danger.
Copyright © 2006 Nokia. All rights reserved.
Press the power key.
If the phone asks for a PIN or a UPIN
code, enter the code (displayed as ****),
and select OK.
Set the time, time zone,
and date
Enter the local time, select the time
zone of your location in terms of the
time difference with respect to
Greenwich Mean Time (GMT), and
enter the date. See "Time and
p. 36.

Plug and play service

When you switch on your phone for
the first time, and the phone is in
standby mode, you are asked to get the
configuration settings from your
service provider (network service).
Confirm or decline the query.
See "Connect to service provider
support," p. 45, and
settings service", p. xi.
G e t s t a r t e d
date",
"Configuration
3