Mr. Heater MHGLLP B Parts List

read instrUctions careFUllY: Read all information and instructions, including Gas lamp
Warning Tag attached to light, before installation or use. Retain this guide for future reference.
available conFigUrations (lamps not inclUded)
Single lamp
parts list and assemblY instrUctions
2
4
5
6
7
indoor gas lamp
optional chandelier kit
Balanced double lamp
For corner double and triple
lamp configurations
• Connect 1/8" plug to
1
2-outlet distributor.
• Attach the 3/8" pipe to
2-outlet distributor.
• Insert 3/8" pipe through ceiling
canopy and canopy holding ring.
• Tighten the canopy holding screw.
• Attach the 3-outlet distributor
to bottom of 3/8" pipe.
• Use 3 long nipples for triple
lamp or 2 long nipples for
3
corner double lamp.
• Attach lamps (not included)
elbow joint(s)
• Connect top distributor
to gas line.
For balanced double and
single lamp configurations
• Connect 2 1/8" plugs to
3-outlet distributor.
• Attach the 3/8" pipe to
3-outlet distributor.
• Insert 3/8" pipe through ceiling
canopy and canopy holding ring.
9
• Tighten the canopy holding screw.
• Attach the 2-outlet distributor
to bottom of 3/8" pipe.
• Use 2 short nipples for
8
balanced double lamp or 1
short nipple for single lamp.
• Attach lamps (not included)
to elbow joint(s)
• Connect top distributor
to gas line.
ENERCO GROUP INC., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 • 216-916-3000
Corner double lamp
Maintain a minimum of 4"clearance to ceiling,
wall, or any other combustible surface.
Gas supply (1/8 NPT female) 3/8"
tubing is recommended.
Before operation, check for any possible
leaks and tighten all connections.
parts list
Item
No.
No.
1 3
2 1
3 1
4 1
5 1
6 1
7 1
8 3
3
9 3
Model #
MHGLLP B
MHGLLP G
Triple lamp
Stock
Description
No.
20360 1/8" NPT pipe plug
Used to plug
unused ports
20398 2-outlet distributor
Used for balanced
double lamp
configurations
20373 Ceiling canopy
Conceals opening
in ceiling
20387 Canopy holding ring
20374 Canopy holding screw
20355 3/8" x 16" pipe
20378 3-outlet distributor
Used for corner
double and triple
lamp configurations
20377 1/8" NPT x 13/16"
short nipple
Used for double lamp
configurations
20379 1/8" NPT x 1 1/2"
long nipple
Used for triple lamp
configurations
20348 1/8" FPT x 1/8" MPT
elbow joint
Connects into
valve of light
20303 Rev. A 07/08