Switching On And Off - Miele S 5000 series Operating Instructions Manual

Switching on and off

^ Step on the On/Off foot switch s.
Models with radio controls on the
handle
To pause the appliance during
operation:
^ Press the stand-by button on the
handle.
Warning: The stand-by button is
designed to pause the vacuum
cleaner for short periods of time
whilst vacuuming. After vacuuming
the device has to be switched off
and unplugged from the mains
supply.
An LED will indicate each time a button
is pressed on the handle.
At the end of the pause, you can do
one of the following:
^ Press the stand-by button again to
switch the vacuum cleaner back on
at the setting you were using before
pausing it.
^ Press the + button to switch the
vacuum cleaner back on using the
highest power setting.
^ Press the - button to switch the
vacuum cleaner back on using the
lowest power setting.
Use
17