Miele T 4659 Ci Operating Instructions Manual page 34

Problem solving guide
Problem
The programme does
not start and the
display is dark.
The interior drum
lighting does not
come on.
The display is in a
different language.
The Start/Stop button
light flashes when a
programme is being
selected.
The display is dark.
The Start/Stop button
light flashes slowly.
34
Possible cause
No obvious cause.
The lighting switches off
automatically (to save
energy).
The lamp needs
changing.
A different language
has been selected in
the Settings - Language
J menu.
This is not a fault.
The flashing indicates
that a programme can
be started.
The display has
switched off
automatically to save
energy (Stand-by
mode).
If the problem
continues there is a
fault.
Remedy
– Is the dryer switched on?
– Is the plug correctly
inserted in the socket and
switched on?
– Is the appliance door
closed properly?
– Has the fuse or circuit
breaker tripped?
Switch the dryer off and then
on again.
Change the lamp as
described at the end of this
section.
Set the language you want.
The flag symbol will guide
you.
After the programme has
started, the flashing will
change to a constant light.
The display will light up when
one of the buttons is pressed.
Contact the Miele Service
Department.