Cleaning The Condenser Unit; Removing The Condenser Unit - Miele Paragon sensor Operating Instructions Manual

Cleaning and care

Cleaning the condenser unit

Detergent residue, hair and fine fluff
from the dryer can get through the fluff
filters and block the condenser unit.
Dust from the room in which the dryer is
installed can also get into the
condenser unit and cause a blockage.
Check the condenser unit at least
twice a year. Always check it if the
Airways indicator light comes on. If
the dryer is used frequently then
check the condenser unit after
approx. 100 drying cycles. Clean it if
necessary.

Removing the condenser unit

^ Open the service panel. Hold the
panel securely when doing this.
^ Now remove the panel by pulling it
diagonally upwards and place it to
one side.
26
^ Turn the lever on the inner cover
downwards to the vertical position.
^ Pull the cover forwards.
^ Remove it by pulling it diagonally
upwards.
^ Turn the lever on the condenser unit
upwards to the vertical position.