Front & Rear Panel Features - Marshall Amplification G80RCD MG Series Manual

From Jim Marshall
I would like to thank you personally for selecting
one of our Marshall MG Series guitar combos.
Your new amplifier has been designed by the same
team of British designers who created all of the
great Marshall amps. It is built to the customary
exacting Marshall standards and will give you an
incredible spectrum of sounds to complement a
wide range of playing styles, as well as being
designed to stand the test of time.
The Marshall name has adorned many of Britain's
finest amps, from the early 1960's through to the
present day. Some of the original vintage amps
have become highly sought after by both amp
collectors and working guitarists alike.
This new line of transistor guitar and bass guitar
combos have been released to unanimous acclaim.
Your combo is part of a new breed of Marshall
amplifier, which has benefited from years of
experience and continual investment in research and
development.
Not only is the sound quality of your Marshall MG
Series amp of a standard that you would only come
to expect from Marshall's own design team, the
Marshall G50RCD, G80RCD and G100RCD also have
a CD input to allow you to play along to CD's. The
ultimate home practice facility.
I would like to wish you every success with your
new Marshall MG Series amplifier, which I am sure
you will find a pleasure to play for years to come.
Yours Sincerely,
1
WARNING! - Important safety instructions
PLEASE READ THE FOLLOWING LIST CAREFULLY
A. ALWAYS fit a good quality mains plug conforming to the latest B.S.I. standards where necessary (UK only).
B. DO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
C. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally or has been dropped.
D. NEVER use an amplifier in damp or wet conditions.
E. ALWAYS unplug this apparatus during lightning storms or when unused for long periods of time.
F. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles
and at the point where they exit from the apparatus.
G. DO NOT switch the amplifier on without the loudspeaker connected.
H. ENSURE that any extension cabinets used are of the correct impedance.
I. PLEASE read this instruction manual carefully before switching on.
Follow all instructions and heed all warnings.
WARNING : This apparatus must be earthed!
WARNING : Do not obstruct ventilation grille and always ensure free movement of air around the amplifier!
USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug. A polarised plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
KEEP THESE INSTRUCTIONS
G50RCD Front Panel Features
NORMAL CHANNEL BOOST CHANNEL
0 10 0 10 0 10 0 10 0 20 LOW
BOOST
INPUT GAIN BASS MIDDLE TREBLE GAIN CONTOUR
6
1 2 3 4 5 7 8
CHANNEL 1 (Normal)
1. Input Jack
Connects the guitar to the amplifier. We
recommend that you always use a high quality
screened cable to help prevent noise, interference
and unwanted feedback.
2. Gain Control
Controls the gain level of the normal channel,
giving clean sounds up to halfway, then bringing
in blues to crunch rhythm sounds as the gain
increases.
G50R CD
HIGH 0 10 0 10 0 10 0 10
BASS TREBLE VOLUME MASTER FX FX LINE FOOT
REVERB SEND RETURN OUT SWITCH
9 10 11 12 13 14 15 16
3-5. Bass, Middle & Treble
Experimenting with these three wide ranging
interactive bands of equalisation will give you a
clearer understanding of the versatile G50RCD
tones available from this channel.
6. Channel Select Push Switch
Push switch to change from normal to boost
channels. Note - This switch must be in for
footswitch to function.
2
POWER
17