Kyocera QCP 6035 Quick Start Manual page 8

It's a Palm handheld
Infrared (IR) Beaming
Exchange business cards, schedules and memos quickly by beaming
information to and from business associates with IR-enabled devices.
To beam memo information
1. Select the memo you want
to beam.
To beam business-card information
1. Enter the fields in the Address
Book to set up the information
you would like to beam as your
business card.
8
2. Point the IR port of Kyocera's
smartphone at the port of
the receiving device, keeping
approximately 6 to 8 inches
between the two devices.
2. Tap . Tap "Select Business Card."
3. A box will appear asking if this
is the contact you want to set as
your business card. Tap "Yes."
3. Tap . Tap "Beam Memo"
from the drop-down menu.
(This command may vary
depending on the application.)
4. Wait for the "Beam Status"
dialog box to indicate the
transfer is complete before
continuing to work.
4. A contact-card icon will appear
indicating that the contact you
selected will be set as your
business card. To quickly beam
your business card, press
for a few seconds.