Default Canadian Holidays; To Add The Pre-Configured Holidays; Replicate Schedule; Default Us Holidays - Honeywell WebVision User Manual

Week and Day – If you select Week and Day, specify the
month, week, and year (Fig. 14).
Fig. 14. Add Special Event dialog box - Week and Day.
4. Enter/select the following information under Select State
• State – Occupied, Unoccupied, and Standby.
• Start Time – The time to start the special event.
• End Time – The time to end the special event.
NOTE: By default the occupancy state is 24 hours
Unoccupied.
5. Click OK to save the settings.
NOTE: Click Cancel to close the window without saving the
changes.
Default holiday list
Table 1 and Table 2 list the default holidays for the US and
Canada.
Table 1. Default US Holidays.
Name
New Year's Days
Martin Luther King Jr. Day The third Monday in January
Presidents Day
Memorial Day
Independence Day
Labor Day
Columbus day
Veterans Day
Thanksgiving Day
Christmas Day
Day
January 1st
The third Monday in February
The last Monday in May
July 4th
The first Monday in September
The second Monday in October
November 11th
The fourth Thursday in November
December 25th
Table 2. Default Canadian Holidays.
Name
New Year's Days
Canada Day
Labour Day
Thanksgiving Day
Remembrance Day
Christmas Day
Boxing Day

To add the pre-configured holidays:

1. Select the US Calendar or Canadian Holidays using the
drop-down list on the Special Event page.
2. Click Add. The selected (US or Canadian) pre-
configured list of holidays is added and is displayed in
tabular format.
IMPORTANT
Special events are not executed if you commit an
error in specifying them. WebVision cannot validate
the dates you enter for a special event. No error is
shown if you configure wrong dates for special event,
provided the dates are in the specified format.
Delete Schedules
To delete a schedule:
1. Click the Schedule tab.
2. Select the check box corresponding to the schedule you
want to delete from the Schedules Name list.
3. Click Delete. A confirmation message appears.
4. Click OK to confirm the deletion.
NOTE: Click Cancel to cancel deletion.
TIP: To delete all schedules at once, check the All check box
in the header and click Delete.

Replicate Schedule

You can replicate one schedule at a time. A maximum of 10
copies of the selected schedule can be replicated. Click
Replicate to replicate that schedule.
To replicate a schedule:
1. Click the Schedule tab.
2. Click Replicate. The Replicate Schedule box is
displayed.
3. Enter the number of copies that you want to create.
4. Add a prefix or suffix to the new replicated schedule's
name in the Label text box.
5. Click OK to confirm the replication.
NOTE: Click Cancel to cancel replication.
7
WEBVISION™
Day
January 1st
July 1st
The first Monday in September
The second Monday in October
November 11th
December 25th
December 26th
95-7769—01