Assembly Instructions - New Balance 5.5e Owner's Manual

Occasionally our products contain components that are pre-lubricated
at the factory. We recommend that you protect flooring, or anything
else the parts may contact, with newspaper or cloth.
To familiarize yourself with the parts involved, lay them out on the floor as shown below. Remove all small
boxes and packing first. Check to be sure all parts are present before beginning assembly.
rear floor tube
computer
book holder
AC adapter
Tools Required:
Combination Wrench/Screwdriver (provided)
Allen Wrench (provided)
Standard Screwdriver
NOTE: All location references,
such as front, rear, left or right,
made in these instructions are
from the user being on the
unit and facing forward.

ASSEMBLY INSTRUCTIONS

swing arms
vertical column tube
metal sleeves
(2 long/4 short)
stationary bar
assembly
dual-action handlebars
New Balance 5.5e
base frame assembly
front floor tube
shipping plugs
foot
platforms
water bottle
with holder
rear
front
caps
rollers
M8 x 15mm allen bolts
M8 spring washers
M8 curved washers
for stationary bar
M8 x 15mm allen bolts
M8 spring washers
M8 curved washers
for vertical column
wrench/screwdriver
M6 x 20mm phillips screws
for rear caps & front rollers
Fastener Pack
M8 x 40mm carriage bolts
M8 washers
M8 acorn nuts
for dual-action handlebars
1/4" x 20mm phillips bolts
M6 washers
for foot platforms
allen wrench
5