Table of Contents
Advertisement
Page 2 of 2
Sensor CH1 (optional)
Sensor CH2 (optional)
Sensor CH3 (optional)
Channel 4
Channel 5 (optional)
Channel 8 (optional)
Channel 9 (optional)
Converter Type
Transponder Configuration:
IMO No (if available)
ShipName
ShipType
Beam
Cargo
RefPtExt: A B C D
BaudRate Sensor1:
BaudRate Sensor2:
BaudRate Sensor3:
Functionality Check:
Now check your Transponder functionality - the correct values for LAT, LON, SOG, COG, and
Time should appear.
Reading out the Alarm Status, the Installation Manual includes a Tabel for reaction of system and
remedy.
Please list the invoked Alarms:
Alarm type:
ID 01 Tx-Malfunction
ID 03 Rx ch1 Malfunction
ID 05 Rx ch70 Malfunction
ID 25 External EPFS lost
ID 29 No valid SOG info
ID 32 Heading lost/invalid
*) will appear at workboat installation
Please return this form by Email after Transponder installation to Nauticast Technical
Support Department to
If Email is not available, please fax this form to: 866-XPACKUS (866-972 2587)
Erstellt: C. Moore
Geprüft: B. Werner
Freigegeben: A. Lesch
Gültig ab: 20.09.2004
Yes
No
*)
*)
info@ais-shop.com
MMSI
CS
Length
Draught
Destination
RefPtInt: A B C D
Alarm type
ID 02 VSWR limit
ID 04 Rx ch2 Malfunction
ID 06 General failure
ID 26 No Sensor
ID 30 No valid COG info
ID 35 No valid ROT info
N:\Technik\TechnicalSupport\Prozess_Doku\InstallationChecklist_V02us.doc
Yes
No
*)
Advertisement
Table of Contents
