English - Mitsubishi Electric MDT42IS User Manual

6. Operate the attached external equipment
Display the signal on the external equipment you wish.
7. Adjust the sound
Make adjustments lowering or rising the volume as required.
8. Adjust the screen (See pages 24-34)
Make adjustments to the display position or settings if re-
quired.
9. Adjust the image (See pages 24-34)
Make adjustments to brightness or contrast if required.
10. Recommended Adjustment
To reduce the risk of "image persistence", please adjust
the following items based on the application being used.
"POWER SAVE" (See page 28), "SCREEN SAVER" (See
page 28), "SIDE BORDER COLOR"(See page 28), "DATE
AND TIME" (See page 31), "SCHEDULE"(See page 31).
11. Installing and removing the stands
The stands are prepared as option.
Refer to the user's manual of the stand for more information.
Stands
(Longer portion
comes to the front.)
How to install the stands
1. Please turn monitor off.
2. Fasten screws on both sides of the monitor.
NOTE:
Install the stands so that their longer portions come to the
front.
How to remove the stands
1. Spread the protective sheet on the fl at surface, such as a
2. Place monitor on the protective sheet.
3. Remove screws with a screwdriver and place them in a
12. Connecting HDMI cable and Display
Screw holes for
MDT421S

English-11

desk.
safe place for reuse.
Port cable
Clamper
Use the clamper
to secure the
cable firmly.