Setting The Day Of The Week And Time - Mitsubishi Electric Mr.Slim Zuba Central User Manual

4. Setting the Day of the Week and Time

Note: The day and time will not appear if clock use has been disabled at Function
Selection of remote controller.
1. Press the or
2. Press the Timer On/Off (Set Day) button (9) to set the day.
Each press advances the day shown at [3]:
3. Sun > Mon > ...> Fri > Sat.
4. Press the appropriate Set Time button (11) as necessary to set the time.
As you hold the button down, the time display (at 4) will increment first in
one-minute intervals, then in ten-minute intervals, and then in one-hour
intervals.
5. After making the appropriate settings at Steps 2 and 3, press the Filter
button (4) to lock in the values.
6. Press the Mode button (2) to exit
Set Time button (11) to show display [2].
Page 8 of 23