Acer AcerPower 4300 User Manual page 58

Ap4300.book Page 48 Friday, May 7, 1999 11:42 AM
48
Chapter 3
BIOS Information
Parameter
IDE Secondary
Channel Slave
Total Memory
1st Bank
2nd Bank
Serial Port 1
Serial Port 2
Parallel Port
PS/2 Mouse
Description
Specifies the current
configuration of the IDE
device connected to the slave
port of the secondary IDE
channel.
Specifies the total amount of
onboard memory. The
memory size is automatically
detected by BIOS during the
POST. If you install additional
memory, the system
automatically adjusts this
parameter to display the new
memory size.
Indicates the type of DRAM
installed in the DIMM 1
socket. The None setting
indicates that there is no
DRAM installed.
Indicates the type of DRAM
installed in the DIMM 2
socket. The None setting
indicates that there is no
DRAM installed.
Shows the serial port 1
address and IRQ settings.
Shows the serial port 2
address and IRQ settings.
Shows the parallel port
address and IRQ settings.
Indicates if there is a mouse
connected to your system.
This is automatically detected
by BIOS.
Format
Drive type,
capacity
Memory size in
MB
DIMM type,
capacity in MB
DIMM type,
capacity in MB
Address, IRQ
Address, IRQ
Address, IRQ
Displays Installed
if there is a mouse
detected;
otherwise, it
displays None.