Installing The Isdn Usb Ta - Acer ISDN 128 Surf USB User Manual

2.3 Installing the ISDN USB TA

Please refer to the following instructions and figures for
installation procedures:
F
IGURE
1. If there is a switch on the back of the ISDN USB TA,
turn it off.
2. Connect your ISDN line to the RJ-45 jack labeled
"ISDN S
0
3. If the ISDN TA has optional "MIC/SPK" jacks, you
can connect a headset.
4. Connect the USB cable to the jack labeled "USB" on
the back of the ISDN TA. Connect the other end to the
PC or to a self-powered USB hub device, e.g., monitor.
You should not connect the ISDN USB TA to a
bus-powered USB hub device, such as keyboard,
because there could be not enough power for the
ISDN TA.
Chapter 2 — Installation
2-2: C ISDN USB TA
ONNECTING THE
" on the back of the ISDN TA.
9