A Few Words About Power; Maintenance; Specifications; Optional Accessories - Meade 50AZ-P Instruction Manual

50mm (2”) altazimuth refracting telescope
Table of Contents

Advertisement

A FEW WORDS ABOUT POWER

The useful higher magnification with any 50mm diameter telescope is in the range of 50 to 100 power. The general
rule to follow with any telescope, regarding power: Only use as much magnification as a steady, well-defined image
supports. The stability of the air varies and is one reason why having various eyepieces is desirable. Higher powers
are no guaranty of better images; in fact, the opposite is often true.

MAINTENANCE

As with any quality optical instrument, lens surfaces should be cleaned as infrequently as possible. A little dust on the
surface of the objective lens causes negligible degradation of image quality and should not be considered reason to
"clean" the lens. When lens cleaning does become necessary, use a camel's hair brush or compressed air to gently
remove dust. Wipe only with a soft, clean cloth, applying as little pressure as possible to avoid scratching glass
surfaces. Note: Remove the dew shield/lens shade (20, Fig. 1) to access the objective lens (16, Fig. 1).

SPECIFICATIONS

Objective (main) lens focal length
Objective lens diameter
Focal ratio
Mounting type
3X Barlow
Tray
Dust Cover
8
625mm
50mm (2.0")
f/12.5
Altazimuth, with locking pan-handle
Looking at or near the Sun will cause irreversable damage to your eye. Do not point this telescope at or near the
Sun. Do not look through the telescope as it is moving.
27 Hubble, Irvine, California 92618
(800) 626-3233
www.meade.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents