McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com HR070 Series Remote Control Programming Guide...
2. Place the AA batteries in the compartment and Control Centers, and Source Components not only match the + and - polarity symbols inside. control a McIntosh Component System, but also have 3. Replace the cover. the ability of controlling non McIntosh Components in your system.
Cable (Cable Converter, Video Accessories, steps 2 to 4 and try entering the code again. Satellite Receivers) 5. Aim the McIntosh Remote Control at the compo- nent and press Power Off. The TV should turn VCR (VCRs, DVD Players) Off. If it does not, repeat steps 3–5, trying each Audio (Audio Amplifiers, Audio Amp code for your brand until you find one that works.
2 to 4 and try entering the code again. after entering the channel fourth digit, and 5 for the fifth digit. 4. Aim the Remote Control at the McIntosh Compo- number 6. To check for other component, repeat steps 1—5,...
Page 22
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 www.mcintoshlabs.com The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice. Printed in the U.S.A. McIntosh Part No. 04114600...