Download Print this page

McIntosh MEN220 Connection Diagram

Room correction system

Hide thumbs Also See for MEN220:

Download this manual See also: Owner's Manual, Manual

Note: Refer to the MEN220 Owner's

Manual page 9 for additional

connection information.

Connection Legend:

Data Cable*-

Sensor/Keypad Cable -

Power Control Cable* -

Audio Signal Cable -

Video Signal Cable -

RF Signal Cable -

Digital Signal Cable -

RS232 Cable -

Ground Wire -

AC Power Cords -

Loudspeaker Cable -

2 conductor shielded with 1/8 inch

stereo mini phone plug on each end.

Loudspeaker (Partial View, Right Channel)

Connect to

AC Outlet

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549

MEN220 Connection Diagram

Controller (Preamplifier)

IR Sensor

Power Amplifier 1 (Partial View, Right Channel)

Part No. 04116400

Preamplifier

Power Amplifier 2 (Partial View, Left Channel)

Loudspeaker (Partial View, Left Channel)

Page 1 Loudspeaker (Partial View, Left Channel) Connect to AC Outlet Power Amplifier 1 (Partial View, Right Channel) Power Amplifier 2 (Partial View, Left Channel) McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 Part No. 04116400...
Page 2 MEN220 Connection in a Processor Loop Controller (Preamplifier) Preamplifier Note: Refer to the MEN220 Owner’s Manual page 10 for additional connection information. Connection Legend: Data Cable*- Sensor/Keypad Cable - Power Control Cable* - Audio Signal Cable - Video Signal Cable -...