Table of Contents
Advertisement
Fast Start
Your new computer is ready to use as soon as you unpack it from the box. If you're
familiar with computers, follow the instructions in this chapter to get your system up
and running in just a few minutes. If this is your first computer, you should read
through the entire Operation Manual before starting the system.
Installing Battery Pack
Before using your computer, you need to install a standard battery pack into your
computer. Place your computer on a flat working surface and follow the steps
below.
1.
Turn over your computer on a soft flat surface.
2.
Align the left side of the standard battery pack along the left side of the battery
compartment and lower it into place.
3.
Lower the right side of the battery all the way so that you feel the battery pack
engages with the connector inside the compartment and the battery pack locks
in place.
4.
Slide the battery lock button to the locked position.
Lower battery pack into
battery compartment
5.
Turn over your computer and go to the next section.
Battery release lever
Battery lock button
Battery pack
CHAPTER 1
1-1
1
Advertisement
Table of Contents
