Using The Floppy Disk Drive Externally - Sharp PC-A800 Series Manual

Using the Floppy Disk Drive Externally

To remove the floppy disk drive from the optional floppy disk drive box (CE-FC01),
2
press the lock latch on the top edge of the cover and pull the floppy disk drive out of
the box.
To use the floppy disk drive as an external drive, follow the steps below:
1. Install the floppy disk drive into the floppy disk drive box. Simply slide the
drive in until it clicks into place.
2. Shut down your computer.
3. Plug the cable from the floppy disk drive box into the parallel/FDD port on the
rear edge of the computer.
4. Restart your computer.
2-16
Press lock latch
back
Pull drive out of
box