Editing To Video Equipment With The Dv Terminal (Ieee1394) - Sharp VIEWCAM VL-SD20S Operation Manual

Advanced Features
Playback
Editing to Video Equipment
with the DV Terminal
(IEEE1394)
This VIEWCAM enables you to perform digital
video editing, using the VIEWCAM as the
playback source. Connect the VIEWCAM to
video equipment with a DV terminal using the
supplied DV cable. The DV cable is able to
transfer all dubbing signals including video,
audio and subcode.
Video equipment
To DV terminal
DV cable (supplied)
Playback
To DV terminal
Slide the DV terminal cover in the
direction of the arrow to open.
65
V L - S D 2 0 S - G B / p p . 0 6 4 - 0 6 8 ; 9 9 / 8 / 1 8 / 1 8 : 0 0
Cutting Unwanted Sequences
Perform "Cutting Unwanted Sequences" on
page 64, using the video equipment as the
recording source.
Notes:
• The DV terminal on the VIEWCAM outputs the
normal playback signal regardless of use of the
strobe playback, playback zoom or picture effect
playback function.
• The VIEWCAM cannot be used as the record-
ing source.
Recording
with DV terminal
G. K . A s s o c i a t e s , To k y o