Advertisement
MAKING BURNER ADJUSTMENTS
Step 2: Adjust Orlfke Hoods
Check the inner cone of the flame. It should be about ll~a " Ion for
cooktop
burners
and 35" long for the oven/broiler
burners 7 see
below).
If the flame must be adjusted,
use a 35" open end wrench
or adjustable
joint pliers to adjust the orifice hood.
To shorten
the cones,
tighten
the orifice
hood by turnin
in the
L.P. direction.
To lengthen
the cones,
loosen the orifice
1 ood by
turning in the Nat. direction,
Figs. A6 and A7.
WARNING:
If you try to measure
the inner cone of the flame, please
use caution.
Burns could result.
7
Advertisement
