Honda 2010 Insight Owner's Manual page 75

Turn Signal and
Hazard Warning
Indicators
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If an indicator does not blink
or blinks rapidly, it usually means
one of the turn signal bulbs is
burned out (see pages 363
Replace the bulb as soon as possible,
since other drivers cannot see that
you are signaling.
When you press the hazard warning
button, both turn signal indicators
and all turn signals on the outside of
the vehicle flash.
Lights On Indicator
This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the
or
ignition switch to the ACCESSORY
(I) or the LOCK (0) position without
turning off the light switch, this
and 365 ).
indicator will remain on. A reminder
chime will also sound when you open
the driver's door.
High Beam Indicator
This indicator comes on with the
high beam headlights. For more
information, see page
This indicator also comes on with
reduced brightness when the
daytime running lights (DRL) are on
(see page
120
Instrument Panel Indicators
position. If you turn the
119 .
).
Cruise Main Indicator
This indicator comes on when you
turn on the cruise control system by
pressing the CRUISE button on the
steering wheel (see page 256
Cruise Control Indicator
This indicator comes on when you
set the cruise control. See page
for information on operating the
256
cruise control.
).
69