Summary of Contents for Marshall Amplification EL84 20/20
Page 1
EL84 20/20, EL34 50/50 EL34 100/100 & Marshall Amplification plc Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England Tel: (01908) 375411 Fax: (01908) 376118 Web Site - http://www.marshallamps.com Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Marshall Amplification plc reserve the right to alter specifications without prior notice.
Page 2
To allow the secure fastening of 19 inch rack units in a rack enclosure, a series of mounting holes are provided on the front of the EL84 20/20 and on both the front and rear of the EL34 50/50 and EL34 100/100. As with all rack mount products of substantial weight, such as the EL34 50/50 &...
STANDBY POWER STANDBY POWER 1. Level 7. Power Controls Level or volume of the EL84 20/20. On/Off Switch for mains power to the amplifier. 2. Presence Adds brightness and top end bite to your Note: To prolong the life of the valves it is always sound.
SEE MANUAL FOR CORRECT OPERATION AND RATING Made in England by: Marshall Amplification plc, Bletchley, Milton Keynes. i n s i d e ; r e f e r s e r v i c i n g t o q u a l i f i e d e x p o s e t h i s u n i t t o r a i n o r m o i s t u r e .
7. Channel B output impedance select Note! 16 Ohm or Using 14 only connects input signal to both 8 Ohm - it is important that your amplifier and loudspeaker channels A & B for parallel mono operation. load are correctly matched. 15.