Troubleshooting - Philips DVDR7310H User Manual

Hdd & dvd player / recorder
Hide thumbs Also See for DVDR7310H:
Table of Contents

Advertisement

Troubleshooting

Problem (HDMI)
No audio output from HDMI
connection.
No video output from HDMI
connection.
EPG (GUIDE Plus+) data is
not available.
90
(continued)
Solution
– You will not hear any sound from the HDMI output if the
source device is only DVI/HDCP (High-bandwidth Digital
Content Protection)-compatible.
– It is not possible to output SACD or copy-controlled DVD-
Audio sources from the HDMI connection.
– When the HDMI on this recorder is used to connect to a TV, it
can be no digital audio/surround sound on Coaxial/Optical
output, depending on the TV's audio capabilities. Press SETUP
on the remote control, go to Audio Output setting and set the
HDMI to { Disable }.
– Make sure that you have activated this recorder as the HDMI
input in the settings for the device you are using. See HDMI
setting.
– HDMI connection can only be made to HDMI-equipped devices
with HDCP (High Bandwidth Digital Content Protection). If you
wish to connect to a DVI connector (equipped with HDCP), you
will need a separate adaptor (DVI to HDMI).
– Make sure the resolution of this recorder matches the device
you have connected using the HDMI. See HDMI setting.
– Check if the HDMI cable is faulty. If there is not signal received
from the HDMI connection, the { Video Upscaling } and { HDMI
output } options in the system menu video output settings will
be greyed out. Replace a new HDMI cable.
– When connecting to a non-HDCP compliant TV, the HDCP
warning message will appear only on the analogue video output.
– When the HDMI and component video are used to connect to a
TV at the same time, it can be no picture output from the
component video connection. Disconnect the HDMI cable.
– Turn off the recorder to standby mode for at least 24 hours. It
will enable downloading of TV listings data. If the recorder is
connected to a cable box/satellite receiver, make sure that it is
switched to the host channel during that 24 hours.
– Make sure that no timer recording is programmed during this
timing, as it will interrupt the EPG downloading.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents