Cd Changer Error Messages - Honda 2008 S2000 Owner's Manual

The chart on the right explains the
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
The audio system will try to play the
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.
For the additional information on
damaged discs, see page 118
Insert a different disc. If the new
disc plays, there is a problem with
the first disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.
Error
Message
1
2
1
2
1
2
.
1
2
1 : U.S. model
2 : Canadian model

CD Changer Error Messages

Cause
Press the magazine eject button, pull out the
magazine, and check for an error message.
FOCUS Error Insert the magazine again. If the error message
does not disappear or the magazine cannot be
pulled out, see your dealer.
No CD in the CD Insert CD.
magazine
Press the magazine eject button, and pull it out.
Check for an error message, and insert the
Mechanical Error magazine again. If the error message does not
disappear or the magazine cannot be pulled out,
see your dealer.
High temperature Will disappear when the temperature returns to
normal.
No CD magazine in the Insert CD magazine.
CD changer
Solution
121