Alarmas - Lowrance Elite 5X DSI Operation Manual

Transducer
Keel Offset (-3.5 feet)
Before setting keel offset, measure the distance
from the transducer to the lowest part of the keel.
If, for example, the keel is 3.5 feet below the trans-
ducer, it will be input as –3.5 feet.
Temperature calibration
Calibrates readings from the transducer tempera-
ture sensor with data from a known temperature
source to ensure the accuracy of temperature in-
formation.
Reset water distance
Reset Water Distance to zero.
Alarms
Enables Shallow alarm and allows you to select the
alarm threshold.
The Shallow alarm sounds an alarm when your ves-
sel enters water shallower than the selected shal-
Keel
low threshold.
Units
Allows you to select the unit of mea-
sure used by your unit.
Simulator
Used to simulate on the water activity.
19
Settings