IEEE C62.41 and C62.45, for Categories • Do not install this device during a lightning storm. A, B, and C. The TPSA9040 is listed to the most recent • This device is rated NEMA 4X. Suitable for indoor edition of UL 1449.
Installation ! ! ! ! ! DANGER Installing the TPSA9040 TVSS: To install the TVSS to the electrical panel equipment, proceed as follows: Ensure power to the electrical panel equipment has been disconnected. Remove the screws securing the outer panel equipment cover to the electrical panel equipment (see Figure 1).
Siemens Technical Support at: 1-888-333-3545. The TPSA9040 weight is 4 lbs. The TPSA9040 is equipped with an audible alarm which will sound in the event of an alarm condition. This indicates a problem with the TVSS which requires further evaluation.
Company prior to the return of any product. Returned products must be sent to the factory with the transportation charges prepaid. Prior to calling Siemens for technical support, please have the following information available: t i u...
Page 6
Buyer’s exclusive remedy for a nonconformity in the Circuit TVSS shall be the repair or the replacement (at Siemens’ option) of the TVSS. Siemens’ obligation to repair or replace shall be in effect only if Buyer has sent written notice of any non-conformity within the Warranty Period.