Table of Contents
Advertisement
Please read this manual and save it with your original sales receipt.
Tools needed for assembly: Phillips Screwdriver,
Adjustable Wrench (or Pliers), Hammer, and Safety Scissors
(all not included).
Use only with a Power Wheels
12 Volt Lead-Acid Rechargeable
®
Battery and a Power Wheels
12 Volt Charger with
®
type 12V connector (both included).
Product features may vary
from the picture above.
©2004 Viacom International Inc. Nickelodeon, Nick Jr.,
©2004 Viacom International Inc. Nickelodeon, Nick Jr.,
Dora the Explorer and all related titles,
Dora the Explorer and all related titles,
logos and characters are trademarks of Viacom International, Inc.
logos and characters are trademarks of Viacom International, Inc.
Owner's Manual
Owner's Manual
with Assembly Instructions
with Assembly Instructions
For Model H7332
For Model H7332
Advertisement
Table of Contents
Related Manuals for Fisher-Price DORA THE EXPLORER H7332
Summary of Contents for Fisher-Price DORA THE EXPLORER H7332
- Page 1 Please read this manual and save it with your original sales receipt. Tools needed for assembly: Phillips Screwdriver, Adjustable Wrench (or Pliers), Hammer, and Safety Scissors (all not included). Use only with a Power Wheels 12 Volt Lead-Acid Rechargeable ® Battery and a Power Wheels 12 Volt Charger with ®...
-
Page 2: Table Of Contents
- only 1 (one) rider at a time. • Use this vehicle ONLY outdoors. Most interior flooring can be damaged by riding this vehicle indoors. Fisher-Price responsible for damage to the floor if the vehicle is used indoors. • For safety reasons, your vehicle has been pre-set so that it will operate at low speed. -
Page 3: B Warnings And Cautions
WARNINGS AND CAUTIONS ELECTRICAL HAZARD • Battery can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. -
Page 4: C Parts
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. •... - Page 5 TABLE OF CONTENTS PARTS .437" .437 Cap Nut - 5 Cap Nut 12 Volt Battery Assembly Tool " Washer - 4 Microphone 12 Volt Charger #10 Lock Nut - 3 #10 x " Screw - 1 Steering Bushing Round Bushing - 2 #6 x 1"...
-
Page 6: D Parts Picture
Note: Some parts are assembled on both sides of the vehicle. This illustration shows assembly on right side only. Vehicle Cowling Seat Wheel - 4 Hubcap - 4 Cap Nut - 5 Steering Column Handlebar Neck 12 Volt Battery TABLE OF CONTENTS PARTS PICTURE 12 Volt Charger Microphone... -
Page 7: E Battery Charging
ELECTRICAL HAZARD ELECTRICAL HAZARD WARNING • Battery can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Page 8 TABLE OF CONTENTS Battery Charger Connector H7332pr-0920...
-
Page 9: F Assembly
WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. - Page 10 Hubcap Cap Nut Cap Nut Assembly Tool Rear Wheel Driver • Slide a " washer onto the rear axle. • Slide the rear wheel driver onto the rear axle. Make sure the rear wheel driver fits onto the pins in the motor assembly. •...
- Page 11 Front Tabs Side Tab Shifter Handle • Press the tab under the back of the seat and lift to remove the seat. • Make sure the motor harness wires are positioned in the channel to prevent them from being pinched between the cowling and vehicle.
- Page 12 • Position the handlebar upright. • Fit the handlebar neck to the bottom of the handlebar. " screws down through the handlebar and • Insert two #10 x 1 handlebar neck. • Fit a #10 lock nut onto the ends of both screws. Make sure the rounded side of the lock nut is down.
- Page 13 Steering Column • Fit the handlebar assembly onto the end of the steering column. Make sure the handlebar grip area points towards the rear of the vehicle. H7332pr-0920 ASSEMBLY Handlebar Handlebar Assembly • Fit the front handlebar assembly into the front of the handlebar. •...
- Page 14 • Insert six #6 x 1" screws through the back handlebar assembly, as shown. Tighten the screws. • Apply labels as shown. For best results, make sure your hands and the areas to which the labels will be applied are clean and dry. ASSEMBLY Hand Grip Handlebar...
-
Page 15: G Decoration
DECORATION Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. •... -
Page 16: H Battery Installation
IMPORTANT! Use only a Power Wheels rechargeable battery. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ® your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. -
Page 17: I Battery Care And Disposal
BATTERY CARE AND DISPOSAL Care If a battery leak develops, avoid contact with the leaking acid and place the damaged battery in a plastic bag. See information below for proper disposal. If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician. -
Page 18: J Safe Driving Rules
RIDING HAZARD WARNING • Prevent Injuries and Deaths • Direct Adult Supervision Required • Keep Children Within Safe Riding Areas. These areas must be: - away from swimming pools and other bodies of water to prevent drownings - generally level to prevent tipovers - away from steps, cars, steep inclines, roads and alleys. -
Page 19: K Vehicle Operation
Lock-Out Shifter Screw REMOVE LOCK-OUT SCREW ON SIDE OF SHIFTER FOR HIGH SPEED OPERATION REMOVE LOCK-OUT SCREW ON SIDE OF SHIFTER FOR HIGH SPEED OPERATION H7332pr-0920... -
Page 20: Lvehicle Care
VEHICLE CARE • Check all screws, cap nuts and their protective coverings regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. • During snowy or rainy weather, the vehicle should be stored inside or under a protective cover. -
Page 21: N Problems And Solutions Guide
PROBLEMS AND SOLUTIONS GUIDE IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels Consumer Relations, toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monday through ®... - Page 22 PROBLEMS AND SOLUTIONS GUIDE PROBLEM Short run time (Less than 1 - 3 hours per charge) Vehicle runs sluggishly POSSIBLE CAUSE Undercharged battery Overcharged battery Battery is old and will not accept full charge Tripped thermal fuse Undercharged battery Battery needs charging Battery is old and will not accept full charge Vehicle is overloaded...
- Page 23 PROBLEMS AND SOLUTIONS GUIDE PROBLEM POSSIBLE CAUSE Vehicle runs in low speed, but High Speed lock-out not disconnected does not run in high speed (Please Note: The vehicle is designed to operate in low speed only when in reverse When the foot pedal is pressed Operation of vehicle in low speed only one rear wheel spins Sometimes the vehicle doesn’t...
- Page 24 Power Wheels For the location nearest you, visit us on-line at www.powerwheels.com. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A. Fisher-Price and Power Wheels by Fisher-Price are U.S. trademarks of Mattel, Inc. PRINTED IN MEXICO...