Advertisement
CAUTION
This product contains small parts
in its unassembled state.
Adult assembly is required.
1
2
Bases
• Place the bases on a flat surface.
• Note the numbers on the bases and on the posts.
• Insert and "snap" the post labeled
• Insert and "snap" the post labeled
ASSEMBLY
ASSEMBLY
Posts
1
into the base labeled
.
1
1
into the base labeled
.
2
2
2
Printed Side Up
Sleeve
• Place the net, printed side up, on a flat surface.
• Slide the base tube through the sleeve on the bottom of the net.
3
2
Base Tube
IMPORTANT! Position the base assemblies as shown. Note the
labels
and
.
2
1
• Place the base assemblies onto the ends of the base tube.
3
3
Base Tube
1
Advertisement
