Parameter Settings; Editing The Settings; Parameter Assignments; Clickpoint - Korg K-Series Editor Owner's Manual

K-Series Editor Owner's Manual

Parameter settings

Editing the settings

Use the buttons and popup menus etc. in the screen to edit the parameters. For details on each
parameter, refer to the owner's manual.
If you enter a "-" (minus sign) in a control change number field, that parameter will be set to No
Assign.

Parameter Assignments

ClickPoint

Here you can edit the parameters assigned to the ClickPoint.
MODE
Specifies the operating mode of the ClickPoint.
MOUSE Lets you use the ClickPoint as a mouse.
CC Lets you assign control changes to the ClickPoint's X and Y axes.
X:CC#, Y:CC#
These fields specify the control change numbers transmitted when you operate the ClickPoint.
No Assign [-]
Control Change Number [0...127]
Page 3
KORG Inc.