Jvc Api For Multicast Streaming - JVC VN-H37 Manual

Getting Status of ONVIF Protocol
Format /api/param?network.onvif.status
Example of Response network.onvif.status=on&200 OK
Interpretation Acquire status of ONVIF Protocol in the camera. "on" or "off" is returned.
Allowed users admin, operator, user
Setting Status of ONVIF Protocol
Format /api/param?network.onvif.status=data
Example /api/param?network.onvif.status=on
Example of Response network.onvif.status&200 OK
Interpretation Change status of ONVIF protocol in the camera. Specify "on" or "off". When status of PSIA
protocol is set to "on", status of ONVIF protocol will not be "on".
Allowed users admin, operator

21. JVC API for Multicast Streaming

The APIs below are related to manual streaming. These are equivalent to the features on the Streaming page of
the WEB setting page. Refer to the instruction manual for details on the Streaming page.
Getting Status of Multicast Streaming
Format /api/param?network.destination(num).status
Example of Response network.destination(1).status=off&200 OK
Interpretation Acquire status of multicast streaming. "num" is encoder channel from 1 to 3. Either on or off will be
returned.
Allowed users admin, operator
Setting Status of Multicast Streaming, or Save Changes
Format /api/param?network.destination(num).status=data
Example /api/param?network.destination(1).status=start
Example of Response network.destination(1).status&200 OK
Interpretation Start/stop multicast streaming of specified encode channel, or save changes to multicast
streaming settings. "num" is encoder channel from 1 to 3. Specify "start", "stop" or "save". Changes of multicast
streaming settings become valid by "save".
Multicast stream is RTP compliant.
If power becomes off during multicast streaming, the streaming starts automatically after power on.
Allowed users admin, operator
7 7