Basic Operations; Monitor Panel/Touch Panel - JVC KW-AVX716 Instructions Manual

Basic operation
Display <AV Menu> screen.
Display <Source Menu> screen.
• Turn on the power.
• Turn off the power. [Hold]
• Attenuate the sound (if the power is on).
Reset the unit.
• Use only when the internal system malfunctions.
• In the explanation, buttons on the touch panel
are indicated inside [
• For details on the touch panel operations, see
each source operation section.
EN_KW-AVX710[EU].indb 5 EN_KW-AVX710[EU].indb 5
Mson — itor panel/touch panel
¢Ñ page 50
Display and erase the Short Cut windows.
Available functions vary among the sources. For details, see each source operation
section.
Change the display information.
Change the sources.
• Activate/deactivate TA
Standby Reception.
• Display <PTy Search> menu.
[Hold]
¢Ñ page 12
].
¢Ñ page 9
Adjust the volume.
¢Ñ page 9
• Display <Open/Tilt> menu.
• Eject the disc and display <Open/Tilt>
menu. [Hold]
• Close the monitor panel when <Open/Tilt>
menu is displayed.
<Open/Tilt> menu
• [OPEN]: Open the monitor panel.
• [EJECT]: Eject the disc.
• [CLOSE]: Close the monitor panel.
• [TILT +/–]: Tilt the monitor panel.
• [Exit]: Erase this screen.
• Shaded icons cannot be used.
5
Remote sensor
INTRODUCTION
07.12.17 5:46:07 PM 07.12.17 5:46:07 PM