Setting up your wireless speaker
Powering your wireless speaker
Installing batteries in the wireless speaker
(skip this if you are not using batteries)
To install batteries in your wireless speaker:
Note: You will need a Phillips screwdriver.
Unscrew the bottom cover (three screws).
1
Insert eight alkaline or rechargeable NiMH C batteries matching the +/-
2
symbols as indicated.
Note: This product will only recharge NiMH batteries. Do not try to charge any other
batteries such as NiCad batteries in this product.
Replace the cover and fasten the three screws.
3
Turn on the wireless speaker using the power switch on the top panel.
4
Bottom
8 NiMH or alkaline C batteries
(not included)
RF-RBWS02-01
11