Advertisement
PROBLEMS AND SOLUTIONS
Problem
No status light
Flashing red
status light
Solid red
status light
7
Possible Cause
No power
to charger
Loose connections
Bad charger
Wrong battery
Loose connections
Undercharged
battery
Battery dead
Undercharged
battery
Solution
Make sure power flow to the wall outlet
is "ON".
Check connections of all plugs. Make
sure the charger connector is tightly
plugged into the battery and the power
cord connector is tightly plugged into
both the charger and the wall outlet.
There is no sure way to tell if your
charger is working unless you have a
volt meter. If you suspect there is a
problem with your charger, contact
®
Power Wheels
Consumer Relations.
This charger is intended for use only
with a Power Wheels
acid battery.
Check connection of all plugs. Make sure
the charger connector is tightly plugged
into the battery and the power cord
connector is tightly plugged into both the
charger and the wall outlet.
Battery needs a 100% (solid green)
charge every other use.
Replace battery with a new,
®
Power Wheels
12-volt lead acid battery.
Charge battery 100% (solid green) or
Ready for Use (flashing green).
®
12-volt lead
Advertisement
