Problems And Warning Signals - Janome JP760 Instruction Book

Problems and Warning Signals

If a buzzer sounds and the indicator shows a warning sign, follow the guidance below.
Warning signal
to
Audible signal
Pip
Pip-pip-pip
Pip-pip-peep
Peep
It is not abnormal that a faint humming sound is coming out from the internal motors.
This machine equipped with LED sewing light, which will not burn out and does not need to replace.
Problem
The start/stop button is pressed with the foot
control being connected.
The foot control is connected or disconnected
while sewing.
The machine is re-started too soon after it
has halted due to the overload.
The buttonhole is sewn without lowering
the buttonhole lever.
Selecting a pattern after buttonhole is completed
with the buttonhole lever still lowered.
The bobbin winder spindle is shifted to the right
for bobbin winding.
The machine is malfunctioning due to a
problem in the electronic components.
The buzzer sounds when:
Normal operation
Invalid operation
Buttonhole sewing completed
Malfunction
Disconnect the foot control.
Turn the power switch off when
connecting or disconnecting the
foot control.
Wait for at least 15 seconds to restart.
If threads are jamming, remove
jammed threads.
Lower the buttonhole lever and
restart the machine.
Raise the buttonhole lever and re-
select the pattern.
Do not sew other pattern with the
buttonhole foot.
Return the bobbin winder spindle
to the left.
Contact the service center or the
store from where the machine was
purchased.
42
Try this