Basting - Janome MC6600P Instruction Book

1
2
Basting Stitch
Machine Setting
Pattern:
Thread tension:1-3
Presser foot:
Foot pressure: 1
Feed dog:
Attaching the Basting/Darning foot P-2
Loosen the thumbscrew and remove the foot holder.
Attach the Basting/Darning foot P-2 to the presser bar
putting the pin on the needle clamp screw.
3
Tighten the thumbscrew firmly with the screwdriver.
1 Thumb screw
2 Pin
3 Needle clamp screw
To sew:
Draw both needle and bobbin thread to the back.
Depress the foot control. The machine will take one stitch
and stop automatically.
Release the foot control.
Hold the fabric taut and slide it to a place where you want
the next stitch.
CAUTION:
Do not pull the fabric toward you while stitching. It may
deflect the needle causing it to break.
37
7
Basting/Darning foot P-2
Dropped (See page 25)