Pipe Insulation; Relief/Drainvalve Insulation Installation; Hot/Cold Pipe Insulation Installation - Rheem Residential 40 & 50 Gallon Use & Care Manual

Installing the water heater.
!
CAUTION: Ensure the
T&P Valve opening is not
obstructed by the insulation.
Drain Valve
10
Relief and DrainValve Insulation Installation
For increased energy efficiency,
this water heater has been supplied
with two 2-3/8" sections of pipe
insulation.
Please install the insulation, according
to the illustration at left.
Slip the insulation cover over the
T&P Valve through the center hole
and align the hole in the side with the
opening of the T&P Valve.
Slip the insulation cover over the
drain valve through the center hole.
Hot Water
Outlet
Hot and Cold Pipe Insulation Installation
Please install the insulation on the cold
water supply inlet and the hot water
outlet as shown in the illustration.
Relief
Valve
Cold Water
Inlet